TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Windshield washer reservoir and pump removed (para
Dispenser, Pressure Sensitive Adhesive Tape
18-2).
(Item 20, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Nut, Self-Locking (Item 167, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect two air hoses (1) from 90-degree fittings (2).
(2) Disconnect air hose (3) from 45-degree fitting (4).
(3) Remove self-locking nut (5), emergency gladhand two-
way check valve (6), screw (7), and washer (8) from
front fender (9). Discard self-locking nut.
Change 1
