TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Lockwasher (2) (Item 93, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
a. Removal.
NOTE
Both stoplight switches are removed the same
way. Rear stoplight switch shown.
Tag wires and connection points prior to
removal.
Terminal lugs on front stoplight switch are
TL154 and TL155.
(1) Remove two nuts (1), lockwashers (2), and terminal lugs
TL152 (3) and TL153 (4) from stoplight switch (5).
Discard lockwashers.
(2) Remove stoplight switch (5) from fitting (6).
Change 1
