TM 9-2320-366-20-4
NOTE
Steps (9) through (11) require the aid of an
assistant.
(9) Install identification plate (6) and gladhand (2) in rear
crossmember (7) with lockwasher (8) and nut (9).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(10) Apply antiseize compound to threads of reducer fitting
(10).
(11) Install reducer fitting (10) in adapter fitting (4).
(12) Connect air hose (11) to reducer fitting (10).
(13) Install dummy coupling (12) on gladhand (2).
c. Follow-On Maintenance.
(1) Start engine (TM 9-2320-366-10-1).
(2) Release TRAILER AIR SUPPLY and SYSTEM PARK
valves (TM 9-2320-366-10-1).
(3) Check gladhand for air leaks.
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
