TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Gravel deflector and gravel extension removed (para
Ties, Cable, Plastic (Item 69, Appendix D)
14-13).
Antiseize Compound (Item 58, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Box and Open End (Item 55, Appendix C)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
(1) Deleted
(2) Deleted
NOTE
Tag air hoses and connection points prior to
removal.
Remove plastic cable ties as required.
(3) Disconnect three air hoses (6) from adapter (7), 90-
degree fitting (8), and 90-degree fitting (9).
Change 1
