TM 9-2320-366-20-4
8-9. TRANSMISSION OIL FILTER REPLACEMENT (CONT)
(8) Install preformed packing (11) on drain plug (12).
(9) Position drain plug (12) in transfer case (13).
(10) Tighten drain plug (12) to 18-24 lb-ft (25-32 Nm).
(11) Install preformed packing (14) on drain plug (15).
(12) Position drain plug (15) in transmission control valve
module (5).
(13) Tighten drain plug (15) to 18-24 lb-ft (25-32 Nm).
c. Follow-On Maintenance.
(1) Add lubricating oil to transmission (Appendix H).
(1.1) Lubricate drive shaft and universal joint (Appendix H).
(2) Start engine (TM 9-2320-366-10-1).
(3) Check transmission oil level (TM 9-2320-366-10-2).
(4) Check for oil leaks around transmission oil filters.
(5) Shut down engine (TM 9-2320-366-10-1).
End of Task.
Change 1
