TM 9-2320-366-20-4
NOTE
Perform steps (18) through (20) on vehicles
equipped with transmission oil cooler hoses.
(18) Disconnect transmission oil cooler hoses (13 and 14)
from two fittings (15).
(19) Remove two fittings (15) from transmission oil cooler (5).
(20) Remove two preformed packings (16 and 17) from
fittings (15). Discard preformed packings.
NOTE
Vehicles may be equipped with either a
corrosion enhanced clamp or a non-corrosion
enhanced clamp. Corrosion enhanced clamps
have a self-locking nut and interior lining. When
removing a non-corrosion enhanced clamp,
replace it with a corrosion enhanced clamp.
Steps (21) and (22) require the aid of an
assistant.
Perform step (21) on vehicles not equipped with
corrosion enhanced clamp.
(21) Remove screw (18), clamp (19), and transmission oil
cooler (5) from bracket (20). Discard clamp and screw.
Change 1
8-41
