TM 9-2320-366-20-4
NOTE
Perform steps (6) through (9) on vehicles
equipped with transmission oil cooler tubes.
(6) Install two preformed packings (6) on fittings (7).
(7) Install two fittings (7) on transmission oil cooler (1).
(8) Position transmission oil cooler tubes (8 and 9) on two
fittings (7).
(9) Tighten transmission oil cooler tubes (8 and 9) to 94-104
lb-ft (127-141 Nm).
(10) Loosen three screws (10) in clamps (11) as far as
possible without disengaging screws from D-nuts (12).
(11) Unhook clamp tab (13) from tab window (14) on three
clamps (11).
(12) Position three clamps (11) on coolant hoses (15, 16, and
17).
Change 1
8-43
