TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Oil, Lubricating, OE/HDO 15W40 (Item 44, Appendix D)
Kit, Filter (Item 63, Appendix G)
Screw, Cap (4) (Item 260.1, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (60 qt (57 L) capacity)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58,
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
Ensure exhaust system is cool before
performing maintenance.
Failure to
comply may result in injury to personnel.
CAUTION
There are two transmission oil filters. Do not
replace one transmission oil filter without
replacing the other. Failure to comply may
result in damage to equipment.
a.
Removal.
(1) Position container under transmission control valve
module (1).
(2) Remove drain plug (2) from transmission control valve
module (1) and drain oil.
Change 2
