TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Antifreeze, Ethylene Glycol, Permanent (Item 12,
Packing, Preformed (4) (Item 179, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Packing, Preformed (2) (Item 178.1, Appendix G)
Container (60 qt (57 L) capacity)
Nut, Self-Locking (Item 130.1, Appendix G)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
(2)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix B)
Crowfoot Attachment, Socket Wrench (Item
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris. Failure to comply may
result in injury to personnel.
Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
(1) Position container under radiator (1).
(2) Remove radiator cap (2) from radiator overflow tank (3).
(3) Open radiator draincock (4) and drain coolant.
(4) Close radiator draincock (4).
Change 1
