TM 9-2320-366-20-4
8-10. TRANSMISSION OIL COOLER REPLACEMENT (CONT)
NOTE
Perform step (22) on vehicles equipped with
corrosion enhance clamp.
(22) Remove self-locking nut (21), clamp (22), and
transmission oil cooler (5) from bracket (20). Discard
self-locking nut.
b. Installation.
NOTE
Step (1) requires the aid of an assistant.
(1) Install transmission oil cooler (1) on bracket (2) with
clamp (3) and self-locking nut (4).
NOTE
Perform steps (2) through (5) on vehicles
equipped with transmission oil cooler hoses.
(2) Install two preformed packings (5 and 6) on fittings (7).
(3) Install two fittings (7 ) in transmission oil cooler (1).
(4) Position transmission oil cooler hoses (8 and 9) on two
fittings (7).
(5) Tighten transmission oil cooler hoses (8 and 9) to 94-104
lb-ft (127-141 Nm).
8-42
Change 1
