TM 9-2320-366-20-4
8-8. WTEC III TRANSMISSION CONTROLS INITIAL INSTALLATION (CONT)
(18) Connect connector P114 (20) to WTEC III transmission
ECU (11).
(19) Connect connector clamp (21) on connector P114 (19).
WARNING
Ensure WTEC III cab transmission harness
does not interfere with throttle linkage.
Failure to comply may result in injury to
personnel.
NOTE
Step (20) requires the aid of an assistant.
(20) Install gasket (22) and connector J119 (23) on cab (24)
with four screws (25), lockwashers (26), and nuts (27).
8-30
