TM 9-2320-366-20-4
(21) Connect connector P119 (28) to connector J119 (23).
(22) Remove nut (29), lockwasher (30), terminal lug TL57
(31), washer (32), screw (33), and washer (34) from
dashboard (10). Discard lockwasher.
(23) Install WTEC III dashboard cable assembly (para 7-11).
b. WTEC III TPSS Calibration.
NOTE
WTEC III TPSS requires calibration after
installation. Calibration is accomplished in
steps (1) through (4).
(1) Position master power switch to on and wait for neutral
(N) indication from WTEC III TPSS (TM 9-2320-366-10-
1).
(2) Position master power switch to off (TM 9-2320-366-10-
1).
8-31
