TM 9-2320-211-20
(2) Remove the capscrews from the sheave
(3) Unwind the cable from the hoist drum by
g u a r d , and remove the guard (fig. 2-258).
moving the hoist control lever to the DOWN
position, and pull the cable out as it unwinds from
the drum.
NOTE
F a i l u r e to maintain tension on the cable
while the drum is turning will cause the
cable to become snarled on the drum and
t h e boom structure.
( 4 ) Completely unwind the cable from the
drum. Remove the hexagon-socket setscrew from
the winch drum, and pull the end of the cable from
the hole in the drum and out through the sheaves
and boom.
( 5 ) Unscrew the connector sleeve, pull the
cable from the connector, and remove the fluted
plug and sleeve from the cable (fig. 2-259).
