TM 9-2320-211-20
c. Installation. Connect the flexible lines at the
NOTE
Place identification tags on the air shift
left front ot the transfer to the rigid lines at the top
lines to facilitate installation.
rear of the transmission. Tighten the connectors
b. Inspect and Repair. I n s p e c t the lines and
connectors for damage. Replace any damaged lines
or connectors.
Section XXVI. MAINTENANCE OF PROPELLER SHAFTS,
U N I V E R S A L JOINTS, AND CENTER BEARING
2-178. General
Four propeller shafts with universal joint assem-
blies (fig. 2-169) at both ends; the transmission-to-
transfer, transfer-to-front axle, transfer-to-forward-
rear axle, and the forward-rear-axle-to-rear axle
shafts; transmit power from the transmission to the
transfer and the front and rear axles. In addition,
propeller shafts are used to transmit power from the
power takeoff to the front winch (on those vehicles
e q u i p p e d with a front winch), from the power
takeoff to the hydraulic hoist pump (on M51 and
M(51A2 models), from the power takeoff to the
power divider (on M62 models only), and from the
power takeoff to the crane hydraulic pump (on
M 2 4 6 model only).
