TM 9-2320-211-20
Section XXIV. MAINTENANCE OF TRANSMISSION
2-172. Service
Check the lubrication level when changing the
engine oil or troubleshooting the transmission. If
necessary,
add lubricant according to the
l u b r i c a t i o n order (LO 9 - 2 3 2 0 - 2 1 1 - 1 2 ) .
a. R e m o v a l .
(1) Remove the screws securing the tunnel.
Pull the tunnel off the cab floor.
(2) Remove the breather vent by rotating it
counterclockwise.
b.
Installation.
(1) Screw the breather vent clockwise into
position.
(2) Secure the tunnel to the cab floor with
screws.
Section XXV. MAINTENANCE OF TRANSFER
Service
Check the lubrication level when changing engine
oil or troubleshooting the transfer. If necessary, add
lubricant according to the lubrication order (LO 9-
2320-211-12).
2-175. Breather
Vent
a. Removal. R e m o v e t h e b r e a t h e r v e n t b y
rotating it counterclockwise.
b. Installation. Secure the breather vent in place
with clockwise rotation.
2-176. Controls and Linkage Repair
Weld, straighten, or replace any broken, bent, or
damaged controls or linkage parts as necessary.
a . R e m o v a l . F r o m underneath t h e vehicle,
unscrew the air shift line connectors (fig. 2-168) at
the junction of the rigid and flexible lines.
