Figure 2-68. Antidiesel control--carburetor with integral antidiesel valve

TM 9-2320-211-20

Figure 2-68. Antidiesel control--carburetor with integral antidiesel valve.

b. Installation.

(1) Position the control knob and control wire

through the instrument panel.

(2) Secure the knob to the instrument panel

with the washer and nut.

(3) Secure the control wire housing to the

bracket with the hexagon head screw.

(4) Position the eye end of the control wire

into the push rod, and secure the control wire to the

push rod with a cotter pin.

2-70. Antidiesel Control Valve Mounted to

Intake Manifold

(Fig. 2-69).

a. Removal.

(1) Remove the control wire from the valve

handle.

(2) Remove the nut, screw, and washer

Figure 2-69. Antidiesel valve and controls--intake manifold

securing the control wire housing to the fabricated

modified degasser models.

bracket.

b. Installation.

(3) Remove the nut and washer behind the

(1) Position the housing and control wire

instrument panel securing the control knob, and

through the instrument panel.

slide the knob off.

(2) Secure the control knob to the instrument

(4) Pull the knob, housing, and control wire

panel with the washer and nut.

out through the instrument panel in cab.