TM 9-2320-366-20-5
(6)
Loosen two jam nuts (8) on 90-degree fittings (7).
(7)
Remove two 90-degree fittings (7) from stinger
cylinder (9).
(8)
Remove two preformed packings (10) from 90-
degree fittings (7). Discard preformed packings.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
(9)
Remove two retaining rings (11) from retaining pin
(12).
(10) Remove retaining pin (12) from folding boom frame
(4).
(11) Remove stinger cylinder (9) from folding boom frame
(4).
Change 2
17-153
