TM 9-2320-366-20-4
This task covers:
a.
Removal
c. Follow-On
b.
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Rubber Strip (Item 260, Appendix G)
Sealing Compound (Item 55.2, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
(2)
Screwdriver Attachment, Socket Wrench (Item 49,
Dispenser, Sealant (Item 16.1, Appendix B)
a. Removal.
(1)
Match mark roof hatch (1) to cab roof (2).
NOTE
Perform step (2) if cab maintenance has
not been previously performed. Replace
screws P/N B1834B1205N with screws
P/N 12422263 and washers P/N
12422217.
Store roof hatch for future installation.
(2)
Remove 12 screws (3) and roof hatch (1) from cab
roof (2). Discard screws.
NOTE
Perform steps (3) and (4) if cab maintenance
has been previously performed.
(3)
Remove sealant from 12 screws (3), roof hatch (1),
and cab roof (2).
(4)
Remove 12 screws (3), washers (4), and roof hatch
(1) from cab roof (2).
(5)
Remove rubber strip (5) from roof hatch (1). Discard
rubber strip.
Change 2
