TM 9-2320-366-20-4
b. Latch Bracket Installation.
(1) Position latch bracket (1) on cab (2) with two washers
(3), screws (4), and self-locking nuts (5).
(2) Install three washers (6) and screws (7) in latch bracket
(1).
(3) Raise cab slightly and remove cab support tool from
engine rear lifting eye (8) (TM 9-2320-366-10-1).
(4) Lower cab (TM 9-2320-366-10-1).
NOTE
Outside screws are loosened first, then the
center screw.
(5) Loosen three screws (7) on latch bracket (1).
Change 1
