TM 9-2320-366-20-4
NOTE
Left and right cab latches are removed the
same way. Right cab latch shown.
(4) Remove two screws (2), washers (3), and cab latch (4)
from cab (5).
d. Cab Latch Bracket Installation.
NOTE
Left and right cab latches are installed the same
way. Right cab latch shown.
Tighten screws only enough that cab latch can
be moved with some resistance.
(1) Position cab latch (1) on cab (2) with two washers (3)
and screws (4).
(2) Raise cab slightly and remove cab support tool from
engine rear lifting eye (5) (TM 9-2320-366-10-1).
(3) Lower cab (TM 9-2320-366-10-1).
Change 1
16-195
