TM 9-2320-366-20-4
16-28. BOARDING HANDLES REPLACEMENT (CONT)
b. Rear Boarding Handle Installation.
NOTE
Passenger side and driver side boarding
handles are installed the same way. Driver
side shown.
(1) Position rear boarding handle (1) on cab (2) with four
washers (3) and screws (4).
(2) Position two washers (5) and screws (6) in rear boarding
handle (1).
(3) Tighten two screws (6) and four screws (4) to 70-85 lb-
in. (8-10 Nm).
c. Front Boarding Handle Removal.
NOTE
Passenger side and driver side boarding
handles are removed the same way. Driver
side shown.
(1) Remove two screws (1) and washers (2) from front
boarding handle (3).
16-200
Change 1
