TM 9-2320-366-20-4
16-26. LATCH AND CAB LATCH BRACKETS REPLACEMENT (CONT)
CAUTION
Ensure cab latch brackets on each side of
the cab support bridge rest squarely on the
support pins.
(6) Tighten three screws (7) to 34-44 lb-ft (44-60 Nm).
(7) Raise cab (TM 9-2320-366-10-1).
(8) Tighten two self-locking nuts (5) to 34-44 lb-ft (44-60
Nm).
(9) Lower cab (TM 9-2320-366-10-1).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(10) Apply sealing compound to inside of latch bracket (4).
Change 2
