TM 9-2320-366-20-4
16-26. LATCH AND CAB LATCH BRACKETS REPLACEMENT (CONT)
CAUTION
Cab latches must be adjusted so that it rides
squarely on the support pins and does not
contact the welded area of the support pins.
Failure to comply may result in damage to
equipment.
(4) Adjust cab latch (1) on support pin (6).
(5) Raise cab (TM 9-2320-366-10-1).
CAUTION
Do not allow cab anchor to change position
while tightening screws. Failure to comply
may result in damage to equipment.
(6) Tighten two screws (4) to 34-44 lb-ft (44-60 Nm).
(7) Lower cab (TM 9-2320-366-10-1).
End of Task.
16-196
Change 1
