TM 9-2320-366-20-4
(7) Position deck plate (14) on vehicle.
(8) Position rear ladder support hand rail bracket (15) on
vehicle with screw (16), two washers (17), and self-
locking nut (18).
(9) Tighten self-locking nut (18) to 105-115 lb-ft (142-156
Nm).
(10) Position ladder (19) and front ladder support hand rail
bracket (20) on vehicle with screw (21), two washers
(22), and self-locking nut (23).
(11) Tighten self-locking nut (23) to 105-115 lb-ft (142-156
Nm).
(12) Position eight washers (24), four screws (25), and self-
locking nuts (26) in ladder support hand rail brackets (15
and 20).
(13) Tighten self-locking nuts (26) to 105-115 lb-ft (142-156
Nm).
c. Follow-On Maintenance.
Install vise (TM 9-2320-366-10-2).
End of Task.
Change 1
