TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Vise removed (TM 9-2320-366-10-2).
Nut, Self-Locking (26) (Item 136, Appendix G)
Tools and Special Tools
Personnel Required
Goggles, Industrial (Item 15, Appendix C)
(2)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
NOTE
Steps (1) through (6) require the aid of an
assistant.
(1) Remove four self-locking nuts (1), eight washers (2), and
four screws (3) from ladder support hand rail brackets (4
and 5). Discard self-locking nuts.
(2) Remove self-locking nut (6), two washers (7), screw (8),
rear ladder (9), and front ladder support hand rail bracket
(4) from vehicle. Discard self-locking nut.
(3) Remove self-locking (10), two washers (11), screw (12),
rear ladder support hand rail bracket (5), and deck plate
(13) from vehicle. Discard self-locking nut.
