TM 9-2320-366-20-4
b. Installation.
NOTE
Step (1) requires the aid of an assistant.
(1) Position rear cab support (1) on vehicle.
NOTE
Left and right sides of rear cab support are
installed the same way. Right side shown.
Order rubber plugs PN 12420305-027 if vehicle
was not originally equipped with them.
(2) Install rubber plug (2) on rear cab support (1).
(3) Position four screws (3) and self-locking nuts (4) in rear
cab support (1).
NOTE
Step (4) requires the aid of an assistant.
(4) Tighten four self-locking nuts (4) to 45-61 lb-ft (61-83
Nm).
(5) Perform steps (2) through (4) on left side of rear cab
support.
Change 1
16-60.1/(16-60.2 Blank)
