TM 9-2320-366-20-4
This task covers:
a. Removal
c. Cab Leveling Valve Adjustment
b. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Cab air springs deflated (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Nut, Self-Locking (4) (Item 150, Appendix G)
Air tanks drained (TM 9-2320-366-10-1).
Nut, Self-Locking (2) (Item 154, Appendix G)
Tools and Special Tools
Personnel Required
Tool Kit, Genl Mech (Item 46, Appendix C)
(2)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
a. Removal.
(1) Remove self-locking nut (1) from lever (2). Discard self-
locking nut.
(2) Remove two self-locking nuts (3), washers (4), screws
(5), and cab leveling valve (6) from bracket (7). Discard
self-locking nuts.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(3) Disconnect two air hoses (8) from cab leveling valve (6).
(3.1) Disconnect air hose (8.1) from cab leveling valve (6) and
tee fitting (8.2).
(3.2) Disconnect tee fitting (8.2) from two air hoses (8.3).
Change 1
