TM 9-2320-366-20-4
16-6. M1093/M1094 DOOR REPAIR/ADJUSTMENT (CONT)
(12) Install door arrestor assembly (14) on cab with
washer (15), two spring washers (16), and screw
(17).
(13) Install door arrestor assembly (14) on bottom of
door (7) with two screws (18).
i. Door Adjustment.
NOTE
Steps (1) through (4) require the aid of an
assistant.
Loosen door hinge screws only enough to
allow small adjusting movements of door.
(1) Support door (1) and loosen six screws (2) on
bottom hinge (3) and top hinge (4).
(2) Adjust door (1) so that gap between door (1) and
cab is approximately equal all around.
(3) Open, close, and open door (1) to ensure correct
operation.
NOTE
Hold door
in
place
while
screws
are
tightened.
(4) Tighten six screws (2) on top hinge (4) and bottom
hinge (3) to 22-26 lb-ft (30-35 Nm).
Change 2
