TM 9-2320-366-20-4
(5) Loosen three screws (5) on strike catch (6) and adjust so
catch is centered in latch assembly (7) slot, as shown.
(6) Tighten three screws (5) to 70-85 lb-ft (8-10 Nm).
(7) Open and close door (1) to ensure correct operation.
NOTE
Ensure door lining fits inside of strip at
bottom of door.
(8) Position door lining (8) on door (1).
(9) Install 12 rivets (9) in door lining (8).
(10) Position latch (10) on door (1) with two screws (11).
(11) Tighten two screws (11) to 65-121 lb-in. (10-14 Nm).
(12) Install knob (12) on lock stud (13).
16-57
