TM 9-2320-366-20-4
CAUTION
Linkage must be installed as shown. Failure
to comply may result in damage to
equipment.
(4) Position linkage (10) on bracket (11) with self-locking nut
(12).
(5) Tighten self-locking nut (12) to 84-108 lb-in. (9-12 Nm).
(5.1) Connect tee fitting (12.1) to two air hoses (12.2).
(5.2) Connect air hose (12.3) to tee fitting (12.1) and cab
leveling valve (14).
(6) Connect two air hoses (13) to cab leveling valve (14).
(7) Position cab leveling valve (14) on bracket (1) with two
screws (15), washers (16), and self-locking nuts (17).
(8) Tighten two self-locking nuts (17) to 84-108 lb-in. (9-12
Nm).
(9) Position linkage (10) on lever (18) with self-locking nut
(19).
(10) Tighten self-locking nut (19) to 84-108 lb-in. (9-12 Nm).
(11) Lower cab (TM 9-2320-366-10-1).
(12) Start engine (TM 9-2320-366-10-1).
(13) Inflate cab air springs (TM 9-2320-366-10-1).
(14) Check for air leaks around cab leveling valve (14).
(15) Shut down engine (TM 9-2320-366-10-1).
(16) Perform cab leveling valve adjustment (sub-para c.).
Change 1
16-65
