TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Damping Fluid (Item 19, Appendix D)
Filter Element (Item 15, Appendix G)
Packing, Preformed (Item 192, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Lockwasher (Item 69, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Vise, Machinist (Item 48, Appendix C)
Personnel Required
Socket Set, Impact (Item 33, Appendix C)
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Both rear gladhands are removed the same
way. EMERGENCY gladhand shown.
(1) Remove dummy coupling (1) from gladhand (2).
(2) Disconnect air hose (3) from reducer fitting (4).
NOTE
Steps (3) and (4) require the aid of an
assistant.
(3) Remove reducer fitting (4) from adapter fitting (5).
(4) Remove nut (6), lockwasher (7), gladhand (2), and
identification plate (8) from rear crossmember (9).
Discard lockwasher.
Change 1
