TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Air brake protecting valve removed (M1088) (para 11-
Antiseize Compound (Item 13, Appendix D)
18).
Nut, Self-Locking (2) (Item 167, Appendix G)
Nut, Self-Locking (2) (Item 168, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Personnel Required
Tool Kit, Genl Mech (Item 46, Appendix C)
(2)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect three air hoses (1) from 45-degree fittings
(2).
Change 1
