TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Nut, Self-Locking (2) (Item 167, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect two air hoses (1) from 90-degree fittings (2).
NOTE
Perforn Step (2) on all models except M1089.
(2) Disconnect three air hoses (3) from fittings (4).
NOTE
Perform steps (2.1) and (2.2) on M1089.
(2.1) Disconnect two air hoses (3) from 45-degree fitting (4.1).
(2.2) Disconnect air hose (3) from fitting (4).
Change 1
