TM 9-2320-366-20-4
11-14. RELAY VALVE REPLACEMENT (CONT)
(3) Disconnect air hose (5) from 90-degree fitting (6).
(4) Disconnect air hose (7) from 45-degree fitting (8).
(5) Remove two self-locking nuts (9), screws (11), washers
(12) and relay valve (13) from panel (14). Discard self-
locking nuts.
NOTE
Note orientation of fittings prior to removal.
(6) Remove 45-degree fitting (8) from relay valve (13).
NOTE
Perform step (7) on all models except
M1089.
(7) Remove three fittings (4) from relay valve (13).
(8) Remove 90-degree fitting (6) from relay valve (13).
(9) Remove two 90-degree fittings (2) from relay valve (13).
(10) Deleted.
Change 1
