TM 9-2320-366-20-4
11-15. BOOSTER VALVE REPLACEMENT (CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
Perform steps (5) and (6) on M1088 and
M1089.
(5) Apply antiseize compound to threads of 45-degree fitting
(7).
(6) Install 45-degree fitting (7) in booster valve (1).
NOTE
Perform steps (7) and (8) on all models
except M1088 and M1089.
(7) Apply antiseize compound to threads of plug (8).
(8) Install plug (8) in booster valve (1).
(9) Apply antiseize compound to threads of three 45-degree
fittings (9).
(10) Install three 45-degree fittings (9) in booster valve (1).
11-88
