TM 9-2320-366-20-4
NOTE
Perform steps (11) and (12) on M1089.
(11) Remove two 45-degree fittings (4.1) from relay valve
(13).
(12) Remove fitting (4) from relay valve (13).
b. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
Perform steps (1) through (5) on all models
except M1089.
(1) Apply antiseize compound to threads of two 90-degree
fittings (2), 90-degree fitting (3), three fittings (4), and 45-
degree fitting (5).
(2) Deleted.
(3) Install two 90-degree fittings (2) in relay valve (6).
(4) Install 90-degree fitting (3) in relay valve (6).
(5) Install three fittings (4) in relay valve (6).
(6) Install 45-degree fitting (5) in relay valve (6).
Change 1
11-82.1/(11-82.2 Blank)
