TM 9-2320-366-20-4
This task covers:
a. Caging
b. Uncaging
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Socket, Socket Wrench (Item 40, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Wrench Set, Socket (Item 50, Appendix C)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Material/Parts
Wrench, Torque, 0-175 lb-ft (Item 58,
Nut, Self-Locking (2) (Item 161, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Caging.
NOTE
To cage brakes, apply caging procedure to
both top and bottom spring brake chambers.
(1) Remove nut (1) and washer (2) from caging bolt (3).
(2) Remove caging bolt (3) from caging bolt holder (4).
Change 1
