TM 9-2320-366-20-4
11-6. REAR SPRING BRAKE CAGING (CONT)
b. Uncaging.
(1) Remove nut (1) and washer (2) from caging bolt (3).
(2) Remove caging bolt (3) by turning to the left 1/4 turn.
(3) Remove caging bolt (3) from spring brake chamber (4).
(4) Install caging bolt (3) in caging bolt holder (5).
(5) Position washer (2) and nut (1) on caging bolt (3).
(6) Tighten nut (1) to 50 lb-ft (68 Nm).
(7) Install rubber cap (6) on spring brake chamber (4).
End of Task.
11-32
Change 1
