TM 9-2320-366-20-4
11-8. REAR BRAKE AIR CHAMBER REPLACEMENT (CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
Clean fittings and front air chamber of all sealing
compound residue prior to installation.
Perform steps (6) through (9) on M1088 and
M1089, and vehicle serial numbers 2451 and
higher.
(6) Apply sealing compound to threads of adapter (4).
(7) Install adapter (4) in front air chamber (2).
(8) Apply sealing compound to threads of 90-degree fitting
(5).
(9) Install 90-degree fitting (5) in adapter (4).
NOTE
Perform steps (10) and (11) on vehicle serial
numbers 0001 through 2450 except M1088
and M1089.
(10) Apply sealing compound to threads of 90-degree fitting
(5).
(11) Install 90-degree fitting (5) in front air chamber (2).
11-42
