TM 9-2320-366-20-4
11-7. FRONT BRAKE AIR CHAMBER REPLACEMENT (CONT)
NOTE
Install plastic cable ties as required.
(7) Connect two air hoses (5) to fittings (1).
CAUTION
Brake pedal must be fully applied before and
during tightening of collet nut. Failure to comply
may result in damage to equipment.
NOTE
Steps (8) through (10) require the aid of an
assistant.
(8) Apply brake pedal and continue holding until steps (9)
and (10) are accomplished.
(9) Hand tighten collet nut (3) against plunger housing (4).
(10) Tighten collet nut (3) 3/16 turn (1/2 tooth).
(11) Install left front tire on vehicle (TM 9-2320-366-10-2).
(12) Remove trestle from front of vehicle.
c. Follow-On Maintenance.
(1) Start engine (TM 9-2320-366-10-1).
(2) Check for air leaks around air chamber and fittings.
(3) Road test vehicle and check for proper brake operation
(TM 9-2320-366-10-1).
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
11-36
Change 1
