TM 9-2320-366-20-4
9-2.
DRIVE SHAFT AND UNIVERSAL JOINT REPLACEMENT/REPAIR (CONT)
NOTE
Perform the following two steps on bearing
cups equipped with tabs.
(8.1) Tighten four screws (8) to 26-35 lb-ft (35-47 Nm).
(8.2) Fold tabs on four screws (8).
(9) Deleted.
(10) Perform steps (7) through (9) on opposite end of
drive shaft (3).
f. Follow-On Maintenance.
(1) Lubricate drive shaft and universal joints (Appendix
(2) Test drive vehicle and check for unusual vibrations.
End of Task.
Change 2
