TM 9-2320-366-20-4
NOTE
Number of shims may vary on each wheel
end.
(2) Remove shim(s) (3) and wheel bearing nut (4) from
spindle (5).
(3) Remove outer wheel bearing cone (6) from wheel end
hub (2).
(4) Remove wheel end hub (2) from spindle (5).
(5) Remove CTIS seal retaining ring (7) from wheel end hub
(2).
(6) Remove CTIS seal guide (8) and CTIS seal (9) from
wheel end hub (2). Discard CTIS seal.
Change 1
10-3
