TM 9-2320-366-20-4
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-locking (4) (Item 162, Appendix G)
Nut, Self-locking (4) (Item 150, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Gasket (Item 29.3, Appendix G)
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
(2)
Socket Set, Socket Wrench (Item 34, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris. Failure to comply may
result in injury to personnel.
Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
NOTE
Remove plastic cable ties as required.
Step (1) requires the aid of an assistant.
(1) Remove four self-locking nuts (1), bolts (2), and lower
front support crossmember (3) from vehicle. Discard
self-locking nuts.
Change 1
