TM 9-2320-366-20-4
(2) Position gasket (5), flywheel cover (6), transmission oil
cooler hose bracket (2) on flywheel housing (7) with four
washers (8) and screws (9).
(3) Tighten four self-locking nuts (4) to 8-11 lb-ft (11-13
Nm).
(4) Tighten four screws (9) to 16-25 lb-ft (21-35 Nm).
NOTE
Step (5) requires the aid of an assistant.
(5) Position lower front support crossmember (10) on vehicle
with four bolts (11) and self-locking nuts (12).
(6) Tighten four self-locking nuts (12) to 295-369 lb-ft (400-
500 Nm).
End of Task.
Change 1
8-137
