TM 9-2320-366-20-4
8-26. TRANSMISSION OIL COOLER HOSE BRACKET REPLACEMENT (CONT)
(2) Remove four screws (4), washers (5), transmission oil
cooler hose bracket (6), flywheel cover (7), and gasket
(8) from flywheel housing (9). Discard gasket.
(3) Remove four self-locking nuts (10), screws (11), and
clamps (12) from transmission oil cooler hose bracket
(6). Discard self-locking nuts.
b. Installation.
NOTE
Install plastic cable ties as required.
Step (1) requires the aid of an assistant.
(1) Position four clamps (1) on transmission oil cooler hose
bracket (2) with four screws (3) and self-locking nuts (4).
8-136
Change 1
