TM 9-2320-366-20-4
8-25. TRANSMISSION OIL COOLER HOSES REPLACEMENT (CONT)
(24) Position drain pan under transmission auxiliary oil cooler
(40).
(25) Remove transmission oil cooler hose (14) from 90-
degree fitting (41).
(26) Remove preformed packing (42) from 90-degree fitting
(41). Discard preformed packing.
NOTE
Perform steps (27) through (29) on models
M1090/M1094.
(27) Position drain pan under transmission auxiliary oil cooler
(43).
(28) Remove transmission oil cooler hose (14) from 90-
degree fitting (44).
(29) Remove preformed packing (45) from 90-degree fitting
(44). Discard preformed packing.
b. Installation.
NOTE
Install plastic cable ties as required.
Perform steps (1) through (3) on M1090/ M1094.
(1) Install preformed packing (1) on 90-degree fitting (2).
(2) Position transmission oil cooler hose (3) on 90-degree
fitting (2).
(3) Tighten transmission oil cooler hose (3) to 94-104 lb-ft
(127-141 Nm).
8-130
Change 1
