TM 9-2320-366-20-4
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Dump body raised to maintenance position (TM 9-
Antiseize Compound (Item 58, Appendix D)
2320-366-10-1).
Ties, Cable, Plastic (Item 69, Appendix D)
Winch control valve assembly removed, if equipped
Hose Assembly (Item 24.6, Appendix D)
(para 17-25).
Hose Assembly, Nonmetallic (Item 24.7, Appendix
Batteries disconnected (para 7-57).
Transmission oil cooler tubes removed (para 8-17).
Hose Assembly (Item 24.9, Appendix D)
M1090/M1094 transmission auxiliary oil cooler hoses
Hose Assembly, Nonmetallic (Item 24.1, Appendix
removed (para 8-28).
Cab raised (TM 9-2320-366-10-1).
Elbow, Pipe to Tube (Item 20.2, Appendix D)
Adapter, Straight, Pipe to Boss (2) (Item 1.1,
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Eblow, Pipe to Boss (4) (Item 20.1, Appendix D)
Pan, Drain (Item 24, Appendix C)
Clamp, Loop (3) (Item 14.1, Appendix D)
Tool Kit, Genl Mech (Item 46, Appendix C)
Clamp, Loop (Item 14.2, Appendix D)
Wrench, Torque 0-175 lb-ft (Item 58, Appendix C)
Screw, Cap, Hex Hd (4) (Item 53.1, Appendix D)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Nut, Self-Locking (6) (Item 150, Appendix G)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Bracket, Angle (Item 13.1, Appendix D)
Socket Set, Socket Wrench (Item 34, Appendix C)
Washer, Flat (4) (Item 280.2, Appendix G)
Crowfoot Attachment, Socket Wrench (P/N SC048
Screw, Cap, Hex Hd (4) (Item 53.2, Appendix D)
NSN 5120-01-335-1126)
Gasket (Item 29.3, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Ensure exhaust system is cool before preforming maintenance. Failure to comply may result in
injury to personnel.
Change 1
