TM 9-2320-366-20-4
8-25. TRANSMISSION OIL COOLER HOSES REPLACEMENT (CONT)
NOTE
Steps (13) and (14) require the aid of an
assistant.
(13) Position clamp (12) on transmission oil cooler hose (3).
(14) Position two clamps (12) on bracket (13) with bolt (14)
and self-locking nut (15).
(15) Tighten self-locking nut (15) to 96-132 lb-in. (11-13 Nm).
(16) Position clamp (16) on transmission oil cooler hose (3).
(17) Position clamp (16) on bracket (17) with screw (18) and
self-locking nut (19).
(18) Tighten self-locking nut (19) to 96-132 lb-in. (11-13 Nm).
(19) Install preformed packing (20) on fitting (21).
(20) Position transmission oil cooler hose (3) on fitting (21).
(21) Tighten transmission oil cooler hose (3) to 94-104 lb-ft
(127-141 Nm).
8-132
Change 1
