TM 9-2320-366-20-4
REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Material/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
Winch control valve assembly removed, if equipped
(Item 20, Appendix D)
(para 17-25).
Cap and Plug Set (Item 14, Appendix D)
Nut, Self-Locking (5) (Item 150, Appendix G)
Nut, Self-Locking (8) (Item 154, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Nut, Self-Locking (4) (Item 158, Appendix G)
Pan, Drain (Item 24, Appendix C)
Lockwasher (6) (Item 95, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Packing, Preformed (2) (Item 178.1, Appendix
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Packing, Preformed (4) (Item 179, Appendix G)
Transmission Auxiliary Oil Cooler Rubber Seal
Socket Set, Socket Wrench (Item 34, Appendix C)
(2) (Item E-10, Appendix E)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Ensure exhaust system is cool before performing maintenance. Failure to comply may result
in injury to personnel.
Change 1
