TM 9-2320-366-20-4
NOTE
Position electrical cables for clearance.
(4) Disconnect connector clamp (10) from connector P209
(11).
(5) Disconnect connector J209 (12) from connector P209
(11).
NOTE
Left front and rear brackets are removed the
same way. Left front bracket shown.
Steps (6) through (14) require the aid of an
assistant.
(6) Remove nut (13), lockwasher (14), washer (15), washer
(16), and screw (17) from transmission auxiliary oil
cooler (1). Discard lockwasher.
(7) Remove self-locking nut (18), bracket (19), two spacers
(20), spacers (21), and screw (22) from bracket (23).
Discard self-locking nut.
(8) Perform steps (6 and 7) on left rear bracket.
Change 1
